Description
NANO MATRIX CARBON
To protect the integrity of carbon frames, the fibres are bonded together with an epoxy resin with added nano particles, increasing impact resistance by up to 40%.
PROLITE 66 TRIPLE BUTTED ALUMINUM
Our proven high-end aluminium (6066) is extremely light and durable. Using triple butted wall thicknesses and hydroforming technology, we can tune the aluminium tubes to give the best possible stiffness to weight ratio.
AWS
When creating the individual carbon elements, an inflatable bladder is used to ensure there are no wrinkles inside the tube as these can add weight and create weakness. This results in a lighter, stiffer and stronger frame.
HFS - HYDRO FORMING SYSTEM
Tubes are inserted into negative moulds and a hot emulsion of water and oil is forced through at pressure, enabling them to be formed into complex shapes.
RACE LINK
A single-pivot rear suspension system optimised for XC riding and 1x drivetrains. A super light (80 g) carbon rocker and linkage system create a light, efficient rear end, totally eliminating pedal-bob.
X-TAPER HEADTUBE
Using a tapered head tube with 1 1/8" bearings in the top and 1 1/4" or 1 1/2" in the bottom creates superb stiffness and precise, confidence inspiring steering.
SMOOTH WELDING
Sometimes called Ãâ€double pass weldingÕ, a second pass over the weld gives a clean organic look to the frame. At first glance, you will be convinced it is carbon.
INTERNAL CABLE
Cables are routed through the frame, entering and exiting through smooth sockets. The bike looks neat, whilst the cables are protected from moisture and dirt.
SMART ENTRY
Cables, housings and brake hoses are clamped under tension to prevent rattling when the trails or roads get rough. All inlets are completely interchangeable to deal with Di2, hydraulic hoses, brake cable and gear cable housings etc.
DOWN TUBE EXIT
Ensures that internally routed cables and wires can move freely without causing any trouble whilst remaining easily accessible for servicing.
DI2 READY
Bikes/frames with the symbol Ãâ€Di2 ReadyÕ are prepared for the installation of Di2 technology with battery mounting in the seat post or within the fork steerer.
12-148 THRU-AXLE Ãâ€BoostÕ
New Boost standard àwider axle widths; 110?mm front and 148?mm rear, allowing a shallower spoke angle for stiffer wheels, especially beneficial in 29ers.
15-110 THRU-AXLE Ãâ€BoostÕ
New Boost standard àwider axle widths; 110?mm front and 148?mm rear, allowing a shallower spoke angle for stiffer wheels, especially beneficial in 29ers.
C-S POST MOUNT DISC
Post mount disc brake calipers fit directly onto the seat stay for a strong and light connection whilst a chainstay post mount positions the caliper on the chainstay within the rear triangle for extra protection and better distribution of braking forces. Another benefit is that internal cable routing is also easier and neater via the chainstay.
REMOTE LOCK-OUT
The suspension fork and/or rear shock can be locked, either directly or via a Ãâ€remote controlÕ lever on the handlebar.
Brand: Merida
Type: Dual Suspension Mountain Bikes
Gender: Unisex
Material: Carbon
Riding Style: Cross Country
Wheel Size: 29"
Rear Derailleur: Shimano Deore XT
Item condition: New
Availability: Buy online, In-store
ID: 105498951
COLOURS UD Carbon (glossy black)
FRAME SIZES MLXL
FRAME NINETY-SIX CFA
FORK Fox Rhythm 32 Float, Air, 100mm suspension travel, Tapered, Remote lockout
SHOCK FOX Performance Elite Float, remote lockout
DERAILLEUR REAR Shimano XT Shadow+
SHIFTERS Shimano XT
BRAKE LEVER Shimano XT
BRAKES Shimano XT
CHAINWHEEL Shimano XT, 34-24 teeth
CHAIN KMC X11-1
HUBS Shimano Deore, 110x15mm width, 32 spoke holes, Centerlock / Shimano Deore, 148x12mm width, 32 spoke holes, Centerlock
RIMS MERIDA Expert CC, 22.8mm inner width
FREEWHEEL Shimano M7000, 11-42 teeth, 11 speed
TYRES Maxxis Ikon, 29x2.2", fold
SPOKES Double Butted Black stainless
HANDLEBAR STEM MERIDA Expert CC, 31.8mm diameter, -17¡ stem angle
HANDLEBAR MERIDA Expert CC, 720mm width, flat
HEADSET FSA NO.55E, 2191018117
SEAT POST MERIDA Expert CC, 30.9mm diameter, 0mm setback, Carbon
SADDLE Prologo Scratch
WEIGHT 12.34 kg
Shipping policy
Products are delivered Australia wide. Shipping costs are influenced by the size and weight of the product and your location, exact shipping costs are calculated in the shopping cart and will be added to the order total before checkout. Regional areas may include addition postage costs (post purchase) and if this is the case you'll be contacted to finalise.
Orders are dispatched within 2 business days and shipping times are estimated at between 3-10 business days depending on your location within Australia. Please be aware deliveries outside of metropolitan areas may take longer. This service will require your signature when the parcel is delivered. If you are not available at time of delivery, a card will be left for you to collect your parcel from the nearest Post Office.
Exchange, Returns, and Refunds Policy
Please choose carefully before you buy.
For faulty products, Bike Zone offer a 14 DAY REPLACEMENT WARRANTY, from the date you receive your product. They do not offer a satisfaction guarantee on any of their products, however due to their high level of customer service, they will always endeavour to keep customers happy and satisfied.
If your product is faulty, it will be replaced with an identical product. If they cannot replace the product, they will offer you the option of choosing another product of the same value, or provide you with a refund for the total value of the faulty product.
Please note: Standard postage fees apply to all return orders. Where the return relates to a faulty item, the replacement product will be sent out to you, at no charge, within 5 working days from the date we receive the faulty product.
When returning your product, please make sure you provide the following details:
- Your full name
- Your order number
- Reason why you are returning the product
- Your instructions informing us how you would like the issue resolved.
Please include the original order confirmation or invoice you received with your product. Also, if you haven't previously provided a contact phone number, please include this with your return. This will ensure the issue is resolved quickly, should anyone need to contact you.
